Repository logo
Davao del Sur State CollegeDSSCInstitutional Repository
 

Undergraduate Theses

Permanent URI for this collectionhttps://hdl.handle.net/20.500.14578/5

Browse

Filters

20247

Settings

Degree: search.filters.degree.Bachelor of Science in Agricultural and Biosystems EngineeringSDG: search.filters.sdg.SDG 9 - Industry, innovation and infrastructure

Search Results

Now showing 1 - 7 of 7
  • Thumbnail Image
    Item
    Evaluation of tray solar dryer for cacao beans
    Reponte, Maria Fe E. (Davao del Sur State College, 2024-05)
    The evaluation of tray solar dryer for cacao beans was conducted at Davao del Sur State College (DSSC). The testing of samples was dried in the tray solar dryer in 2 batches operated separately for trials. It was revealed that the moisture content of the samples was reduced from 48% to 6.5% for the batch of operation same as the second batch reduced from 48.3% to 6.5%. It was found out that the total mean of drying rate in the second batch (2.48 g/min) was relatively high than the first batch (1.97 g/min). For the drying capacity, it was observed that the second batch (297.71 g/hr) was relatively high than the first batch (285.07 g/hr). In addition, the drying recovery revealed that the first batch (96%) was relatively high than the second batch (95%). It also observed that the drying efficiency in the first batch (4.5%) was higher than the second batch (3.7%). While the air flow rate of first batch (4.83 m3/min) was lower than second batch (5.35 m3/min). In terms of drying time, the second batch with two layers required less time (48 hours) than the first batch (60 hours). According to its financial analysis, using 4 trays had a higher return on investment of tray solay dryer for cacao beans of 80% and a payback period of 1.2 years than using 6 trays, which had 73% and 1.4 years of payback period. In conclusion, the result of the parameters in the two batches had difference from each other due to weather condition every day. It varies from time to time because of the temperature that was uncontrolled.
  • Thumbnail Image
    Item
    GIS-based spatial mapping inventory of agricultural machineries in Bansalan, Davao del Sur
    Culango, Arah May Q. (Davao del Sur State College, 2024-06)
    Agricultural machinery has become an integral part of agricultural sector today, and has revolutionized the way of farming and production. The study conducted to assess the status of all Agricultural machineries in the area. This study was conducted at the municipality of Bansalan, Davao del Sur last November 2023 to January 2024. It aimed to assess and determine the status of all agricultural machineries in Bansalan, Davao del Sur. A complete enumeration sampling design was used in data gathering among the eleven (11) barangays with identified agricultural machineries in the municipality of Bansalan, Davao del Sur. A survey questionnaire was used to determine the owners' profile and machinery's profile using the Global Positioning System (GPS), the coordinates of the location of all machinery storage in the municipality was gathered. Results showed that 90% of the agricultural machineries were functional while only 10% were under-maintenance and non-operational. Results showed that there was 85% of registered and 15% of unregistered machineries. These results may be useful as a source of monitoring and evaluation. Moreover, registration status of the agricultural machinery need improve regulatory compliance. The inventory was utilized to monitor the usage of agricultural machinery over time, assess the impact of interventions, and evaluate the effectiveness of agricultural programs and policies. Thus, the findings may be relevant in the development of municipal legislation wherein barangay or municipal officials may use the study to propose and implement projects such as mechanization level and index mapping in specific agricultural operations in the municipality to improve the production in the municipality. Also, promote Agricultural and Fisheries Mechanization Law of 2018.
  • Thumbnail Image
    Item
    Water consumption and growth of pechay in Kratky method at different depth level of nutrient solution under shaded condition
    Canon, Kirby S. (Davao del Sur State College, 2024-05)
    Green crops are currently cultivated using a hydroponic method. However, the production cost is quite expensive due to the higher cost of commercial nutrient solutions. The purpose of the thesis study was to explore the possibility of reducing the quantity of nutrient solutions and their impact on the growth of pechay. The study was carried out using a Completely Randomized Design (CRD) with three treatments replicated three times. T1 (2 inches depth), T2 (3 inches depth), and T3 (4 inches depth). The collected data were analyzed using a One-Way Analysis of Variance (ANOVA) at a significance level of 5%. The Least Significant Difference (LSD) test was employed to ascertain the variations between the different treatments. The analysis indicated that the treatments revealed significantly varied in root length with a P-value of 0.0010. Further, the analysis indicates that there is no statistically significant difference in terms of mean daily water consumption, plant height, number of leaves, breadth of leaves, plant yield, mean daily difference temperature nutrient solution, and mean daily difference pH level, as indicated with P-values of 0.03272, 0.3787, 0.4376, 0.3787, 0.0727, 0.2997, and 0.4029 respectively.
  • Thumbnail Image
    Item
    Processing of paperboard from the fiber of torch ginger (Etlingera elatior) stem at different levels of cassava starch as binder
    Blasquez, Irenella A. (Davao del Sur State College, 2024-05)
    This study examined the potential of torch ginger (Etlingera elatior) stem fiber as an alternative source of fiber added with different levels of cassava starch as binder for paperboard production. The study was established with three (3) treatments and each is replicated thrice. The treatments were: Treatment 1: 240 grams cassava starch, Treatment 2: 320 grams cassava starch, and Treatment 3: 480 grams cassava starch. Using a molder, the pulp was molded and sundried until the desired weight was achieved. The paperboards were then tested in terms of odor, paper whiteness, smoothness/texture, grammage, water absorbency, and pH level. The data collected was statistically analyzed using one-way analysis of variance (ANOVA) at 1% and 5% levels of significance. Statistically, results showed significant difference in the odor, paper whiteness, smoothness of texture, or water absorbency of the produced paperboard among the treatments, while the ANOVA results for grammage showed a significant difference. Moreover, the pH level was tested in a composite manner, with pH values ranging from 8.7-9.0 and Treatment 1 having the lowest unit production cost analysis which if PHP 14.46 per piece of paperboard. Thus, torch ginger (E. elatior) stem fiber is a potential material for paperboard production.
  • Thumbnail Image
    Item
    Yield and quality analysis of bioethanol produced from waste coconut water (Cocos nucifera L.) and sugarcane molasses under different fermentation conditions
    Rom, Ferly Jane N. (Davao del Sur State College, 2024-05)
    Bioethanol production involves materials containing sugar to be converted into alcohol. It is a process that requires fermentation, where active organisms are utilized to break down sugar and turns them into alcohol. The purpose of this study was to determine the ideal conditions in the fermentation of waste coconut water and sugarcane molasses with initial pH level between 4.0 - 5.0 for six days in order to produce good quality of bioethanol. the experimental samples were laid in complete randomized design (CRD) with three treatments, namely; T 1 (Aerobic), T2 (Anaerobic) and T3 (Aerobic-anaerobic) and each was replicated four times. The parameters assessed were pH level after fermentation, alcohol content (%), ethanol content (%) of the bioethanol. The gathered data was analyzed using One-way ANOVA and LSD at 5% level of significance. Based on the results, T3 obtained the highest mean pH level of 3.15 after fermentation and alcohol content of 1.6%, followed by T2 with a mean pH level of 3.0 and an alcohol content of 1.1%. T1 obtained the lowest mean pH level of 2.92 after fermentation and an alcohol content of 0.4%. The results revealed further that T3 produced highest percentage of ethanol content of 24.4% and yielding 2.8% bioethanol, followed by T2 obtaining 16.4% ethanol content and yielding 1.8% bioethanol. Lastly, T1 got the lowest ethanol content of 3.01% and yielding 1% bioethanol among the tree treatments. The ANOVA results revealed that there's a high significant difference in terms on the pH level after fermentation and alcohol content (%) among the means of the three treatments. Generally, based on the results, the researcher concludes that, T3 (Aerobic-anaerobic) is the most effective condition in the fermentation process of waste coconut water (Cocos nucifera L.) and sugarcane molasses utilizing Saccharomyces cerevisiae for bioethanol production.
  • Thumbnail Image
    Item
    Conductive effect of ferric chloride (FeCl3) on carbonized Chloris barbata Sw. stem via activation-carbonization-pyrolysis method
    Retiza, Debie T. (Davao del Sur State College, 2024-05)
    This study was conducted to determine the conductive effect of ferric chloride (FeCl3) on carbonized Chloris barbata sw. stem via the activation-carbonization-pyrolysis method. The study was accomplished utilizing a Completely Randomized Design, which comprised five (5) treatments and three (3) replications. The activated carbon produced was made using C. barbata stem and ferric chloride (FeCl3) at different molar concentrations. Control -no FeCl3(T1), 1 molar concentration (T5). The study was carried out to determine the electrical conductivity, surface characteristics in terms of pore and elemental composition, surface area, and the cost analysis of the activated carbon. The data were analyzed using One-Way ANOVA of variance at 1% and 5% significance levels, Scanning Electron Microscope (SEM), Energy Disperse X-ray Spectroscopy (EDX), Brunauer-Emmett-Teller (BET), and Fourier Infrared Spectroscopy (FTIR). The results revealed that the electrical conductivity of all treatments was shown to be statistically highly significant. According to the findings, T5 (4 M) registered the highest electrical conductivity at 2677.06 x 10-6 μS/m. It was also found to display micropore structure and various organic and inorganic functionalities, register relatively low surface area, and more acceptable production cost per unit mass.
  • Thumbnail Image
    Item
    Adsorption of methylene blue by magnetized achiote (Bixa orellana) pericarp ash: Effect of pH and kinetics
    Arellano, Jeramay, M. (Davao del Sur State College, 2024-06)
    Wastewater management has long been a significant issue for society. In the Philippines, achiote pericarp is often considered an agricultural waste. It is typically left in open fields or burned in the open air near the trees where they are harvested. This study explores the potential use of this waste material (achiote pericarp ash, APA) in removing dye from liquid solutions. To improve the adsorption capacity of APA, it is necessary to incorporate Fe3O4 into it. This will enhance its ability to effectively adsorb Methylene blue solution. To address this, APA had been impregnated with Fe3O4 nanoparticles to produce magnetized APA (MAPA). The APA used in this study was sourced from the farmlands of J. P. Laurel Malungon, Sarangani, Philippines. An adsorption experiment was thoroughly conducted, investigating the effects of pH and kinetic changes. The MB adsorption process was found to fit with a pseudo-quadratic model, with maximum adsorption observed at pH 10. The identification of functional groups presents before and after magnetization was conducted using Fourier transform infrared spectroscopy (FTIR). Among theme were -OH (intramolecular H-bond), O=OH (phosphorus oxoacid), -CO-CH3 (ketone), -OH (primary alcohol), and -SiCl3 (silicon compounds). These findings encourage farmers to reuse agricultural waste as a valuable product. Future related research could investigate the use of a different dye color or another type of biomass. Ultimately, this investigation provides significant knowledge about the potential role of agricultural by-products for wastewater treatment processes.